Proven Waxing & Tuning Approaches for Your Ski and Snowboard
Go to: Previous Article Next Article
All over earth, millions of individuals are gratified when they go skiing and snowboarding. When it comes to the topic of care with regards to waxing and tuning, it stands to reason that you would come across scads of information on the Internet on the topics. Since it is the internet, you'll also find variations in the quality and accuracy of that information. So we always recommend you read from a variety of reputable and credible sources when you're doing research. Accordingly, we're here to provide you with solid tuning and waxing recommendations for ski and snowboard so you'll reap the most benefits out of your sport.
There are many reasons why you should keep a good edge and wax job on your skis. Because you can fall due to dull edges, we're talking safety here as well as performance. You could be in for a disappointing ride with dull ski edges because they won't grip properly, especially on ice. You can spend a lot of time falling and getting back up if your skis don't grip. Waxing your skis isn't just about getting a good wax job but also about being sure to use the appropriate wax for your ski conditions. Because the outside temperatures can cause issues, you need to consider that as well when waxing your skis. You can be slowed down by the wax on your skis if it is too cold out for what you used. Be sure to consider all these factors when preparing to wax your skis.
It is certainly better to use hot wax, so you should know how that's done. A digital iron adjusted to 248 degrees is ideal. However, you can do the job without a digital iron also. Set your iron at a low temperature and raise it until your wax melts.
Gradually turn the dial up on the iron, but stop when contact with the iron causes the wax to smoke. You want to control the temperature, so don't change it too quickly. You don't want the wax to smoke, so when it begins to do this, turn down the temperature a little. Your waxing iron is now at the ideal temperature, near 248 degrees, and you can wax away now.
Before you start you'll need to get as much of the old wax and residue off as you can. The best way to do this is with a good scraper. Man made snow will leave a residue on your skis. Be aware that this product residue will slow you down rather than speeding you up. Once in a while you'll hit a spot that feels just like dirt instead of snow. So get as much off your skis or board as possible, then clean the bottom with a solvent and cloth to remove any leftover residue. If you look you will find alot of useful information about caring for your board and skis. For some great care ideas and help talk to your friends. One way to get good information is to go to your local ski rental shop. The bottom line is you need to do whatever it takes to keep your board and skiis in tip top shape. When your equipment is in excellent condition you will have a funner more safe experience.
Article Source: Articlelogy.com
- Credit Cards A big selection of Cards in all flavors: Bad Credit Cards, Secured Cards, Prepaid Cards, Credit Cards for Canada, Low Interest Cards, etc -
Word Count: 554
Reduce Your Debts Without Bankruptcy. See How Much You Can Save. Free Debt Analysis
