Caring For Your Snowboarding Equipment
Go to: Previous Article Next Article
One of the most undereducated aspects of every snowboarder is their ability to maintain and care for their snowboarding equipment. A snowboard is a pricey purchase, so learning how to maintain and clean your snowboard properly will essentially save you lots of money since you will get the most amount of time possible out of your snowboard. Also, the more wear and tear your snowboard gets over the years, the worse performance you'll get back from it. In this article, I'll teach you how to perform routine maintenance on your snowboard so that you can continuously keep on snowboarding winter after winter.
When snowboarding season is over, the first thing you want to do is give your snowboard a good inspection. What you want to keep an eye out for is any dirt or grime that may have accumulated on the board over the winter season. To clean off the dirt, apply a small amount of non-abrasive cleaner to a damp rag. Then, using the rag, wipe off the dirt. This should remove all the dirt, as well as any wax left from your previous snowboarding sessions, and it will leave a clean board for you to apply your last coat of was before storing it away. Make sure the snowboard is completely dry before finishing.
Before you start putting on that final coat of wax, give the board one last thorough check for any damage you may have done over the winter. If any of the edges look worn or dull, take this time to file them down back into the condition they were in when you bought the board, or as close as you can get it. If there is damage to the base, and you have a p-tex candle, use this time to repair that. If you're not confident in what you are doing, I recommend taking it to a pro shop and asking them to perform the repairs for you. Also, ask them if they would be kind enough to sit in while they repair your board. This way, you can get an understanding of how everything is done, and after next winter you can save a few bucks by doing all the repairs yourself.
Now for the waxing. Get out your wax, iron, and scraper. Although you can use any household iron, there are irons made specifically for snowboards that make your job much easier. With the iron, apply the wax liberally to the board, making sure to cover the base and the edges. Remove any excess wax from the base and the edges. The wax will prevent your board from drying out and rusting while it is stored away for the summer.
If you're not confident in your waxing abilities, or if you just don't have the time, you can take your board to a pro shop for a waxing. A waxing at a pro shop will cost you around $20, but towards the end of the season you should be able to find a better price if you look around. Whether you want to take the time out to maintain a snowboard yourself, or if you just want to pay someone to take care of it for you, it's essential that you keep your snowboard in top condition so that you can get as much use as possible out of your equipment.
Article Source: Articlelogy.com
- Credit Cards A big selection of Cards in all flavors: Bad Credit Cards, Secured Cards, Prepaid Cards, Credit Cards for Canada, Low Interest Cards, etc -
Word Count: 566
Reduce Your Debts Without Bankruptcy. See How Much You Can Save. Free Debt Analysis
